Working principle
When the self-cleaning brush screen filter recognizes too much dirt building up on the surface of the filter screen as well as a pressure difference between the inlet and outlet water reaching a preset value, it will automatically start its self-cleaning program. This entails the motor driving a rotating brush to remove the dirt buildup from the filter screen and switch on the electric valve for discharging the dirt. This effectively cleans the filter back into its optimal filtering state.
characteristic
The time allocated for cleaning can be adjusted to fit your needs, ranging from 20 to 120 seconds.
No need to turn down the water during self-cleaning.
The pressure loss caused by blowdown less than 0.5 bar.
The flow deviation limited to less than 1%.
Self-Cleaning Brush Screen Filter, STN (for Sea Water)
- Installation: vertical installation
- Flow rate (single filter): 150-1800 m³/h (larger flow can be obtained by connecting multiple units in parallel)
- Nominal pressure: 1.0 MPa, 1.6 MPa
- Operating pressure: 0.20-1.0 MPa
- Maximum operating temperature: 60 ºC
- Filtration degree: 200-3500 micron
- Control mode: differential pressure/timing/manual
- Cleaning time: 15-120 s
- Cleaning mechanism speed: 14-25 rpm
- Cleaning method: electric brush cleaning
- Cleaning pressure loss: 0.01-0.08 MPa
- Operating voltage: AC 380V, 50Hz, three-phase four-wire
- Control voltage: AC 220V, 50Hz
- LCD display interface, user-friendly design, easy operation
Technical Specifications
Model |
Inlet/outlet connection (mm) |
Max. flow rate (m³/h) |
Filtration area (cm²) |
Drain valve DN (mm) |
D mm |
Water consumption per cycle (L) |
Motor power (kW) |
Weight (kg) |
STN-150 |
DN150/10 |
150 |
4500 |
DN50/10 |
325 |
130 |
0.55 |
260 |
STN-200 |
DN200/10 |
300 |
5100 |
DN50/10 |
325 |
130 |
0.55 |
280 |
STN-250 |
DN250/10 |
400 |
9100 |
DN50/10 |
400 |
180 |
0.75 |
420 |
STN-300 |
DN300/10 |
500 |
10000 |
DN50/10 |
530 |
180 |
0.75 |
510 |
STN-350 |
DN350/10 |
800 |
14400 |
DN50/10 |
620 |
200 |
0.75 |
650 |
STN-400 |
DN400/10 |
1000 |
17000 |
DN80/10 |
720 |
250 |
0.75 |
760 |
STN-500 |
DN500/10 |
1800 |
30000 |
DN80/10 |
920 |
250 |
0.75 |
950 |
The flow accuracy in the table is 500 μm. For other technical parameters, please consult Xuyang for details.
Self Cleaning Filter For Water Treatment
Our Exhibition
Packing & Shipping